 |
CONTINUOUS PREEXPANDER | |
 |
Glossary | |
 |
Features table | |
 |
Pictures | |
|
GLOSSARY |
Preexpander:
| • |
Rugged construction for a continuous operation without maintenance. |
| • |
Automatic shut down and start up system that assures no lumps. |
| • |
Feed system that allows high flexibility on flows for high and low densities, using an adjustable frequency drive. |
| • |
Inside view with glasses at two levels. |
| • |
Doors allow access to preexpander inside for lumps removal if needed. The agitator shaft can be removed. The feed screw can be dissembled for cleaning. |
| • |
PLC control can be connected to an automated silos control operation. |
Fluid bed:
| • |
Oversized for current market resins. |
| • |
Air pre-heater can be installed to the bed in order to dry more effectively and to decrease the residence time in silos and molding cycles. |
| • |
The outlet material goes trough a screen taking the lumps to a grinder, assuring the correct molding machine operation. |
|
FEATURES TABLE |
| PRE-EXPANSOR / PRE-EXPANDER |
EC1 |
EC2 |
EC3 |
EC4 |
EC5 |
 |
|||||
| Diámetro / Diámeter (mm) | 400 |
600 |
800 |
1000 |
1300 |
| Altura / Height (mm) |
1200 |
1800 |
2400 |
3000 |
3600 |
| PRODUCCION (Kg/hr) |
|||||
| Densidad 25 kg/m3. Bead 0,4-0,6 mm. |
100 |
325 |
750 |
1500 |
3000 |
| Densidad 14 kg/m3. Bead 1,0-1,4 mm. |
25 |
100 |
250 |
500 |
1000 |
| CONSUMOS (Kg/hr) |
|||||
| Vapor a/ Steam at 0,2 kg/cm2 |
20-30 |
30-50 |
40-80 |
60-120 |
100-200 |
| Aire a/ Air at 0,5 kg/cm2 |
0-20 |
0-20 |
0-20 |
0-20 |
0-20 |
| POTENCIA /POWER (KW) |
1,5 |
2 |
3 |
4 |
5 |
| LECHO FLUIDO / FLUID BED |
EC1 |
EC2 |
EC3 |
EC4 |
EC5 |
|
|||||
| Longitud /Length (mm) |
2000 |
2000 |
3000 |
4000 |
5000 |
| Anchura / Width (mm) |
700 |
700 |
1000 |
1000 |
1000 |
| Altura / Height (mm) |
1000 |
1000 |
1000 |
2000 |
2000 |
| POTENCIA / POWER (KW) |
1,5 |
1,5 |
2,0 |
3,5 |
4 |
|
PICTURES |
 |
 |